Performance Chip OBD2
Regular price:
product unavailable
4.875
Description
Unleash the Power
UP TO:
30% POWER
UP TO:
30% TORQUE
UP TO:
15%Save fuel
Increasing power is possible by using the power reserves left by the manufacturer.
SIMPLE INSTALLATION IN THE DRIVER'S CABIN – connection directly to the OBD2 socket, without opening the hood.
VERY SIMPLE INSTALLATION – no tools or car disassembly required, quick device plug-in.
NO PERMANENT ENGINE MODIFICATION – the device does not change the car's factory settings permanently.
RETURN TO STOCK AFTER DISCONNECTION – the car returns to original factory settings.
PLUG & DRIVE SYSTEM – ready to drive immediately after connection.
NO TECHNICAL KNOWLEDGE REQUIRED – no need for programming or configuration, the easiest possible tuning option.
AUTOMATIC ADJUSTMENT – learns the car while driving (approx. 150–200 km).
POWER INCREASE – utilizes engine power reserves left by the manufacturer.
KEY ENGINE DATA – OBD2 chip tuning uses, among others, RPM, throttle, temperature, and air density.
DRIVING EFFECT – better throttle response, smoother acceleration, and more dynamic performance.
Simple installation in the driver's cabin
Connection directly to the OBD2 port, without opening the hood.
Benefits of use
- INCREASED ENGINE POWER
up to 30% more power in Diesel engines and up to 20% in gasoline engines, for better performance. - INCREASED TORQUE
up to 30% in Diesel engines and up to 20% in gasoline engines, providing a more dynamic drive. - BETTER THROTTLE RESPONSE
faster and smoother acceleration. - REDUCED FUEL CONSUMPTION POSSIBILITY
savings up to 10% while maintaining the same driving style. - EASY DISASSEMBLY
after disconnecting the chip, the vehicle automatically returns to factory settings. - NO INTERFERENCE WITH ORIGINAL SOFTWARE
the chip works independently, without changes to the ECU.
OBD Chiptuning and its benefits:
- QUICK INSTALLATION IN LESS THAN 15 MINUTES!
- without opening the hood and without specialized tools.
- DPF/GPF COMPATIBLE
- fully functional in vehicles with Diesel and gasoline particulate filters.
- INCREASED TORQUE
- better throttle response and more dynamic acceleration.
- ECONOMIC ALTERNATIVE TO PROFESSIONAL REMAPPING
- similar effects at a lower price.
- SAFETY AND QUALITY GUARANTEE
- CE, UKCA, and RoHS certificates, compliance with European standards.
- WITHOUT ENGINE MODIFICATION
- after disconnection, the vehicle automatically returns to factory settings.
- HYBRID AND LPG COMPATIBLE
- ChipPower® OBD chip also works with hybrid and gas installations.
Technical specification:
| PROCESSOR | PIC16F59-I/PI (MICROCHIP) |
| PROCESSOR TYPE | Flash_Based, 8-bit CMOS |
| FLASH MEMORY | 2048xI2 |
| COMMUNICATION PROTOCOLS | CAN ISO15765-4 / SAE J1850 PWM / SAE J1850 VPW / ISO9141-2 / ISO14230-4 KWP |
| CURRENT CONSUMPTION | 45 mA |
| OPERATING VOLTAGE | 10V–15V DC |
| OPERATING TEMPERATURE RANGE | from -40°C to +85°C |
| Plug & Drive | YES |
Installation Manual - step by step
Attention! Before starting the installation, make sure the vehicle is turned off. Detailed information can be found in the user manual of the selected chiptuning module.
1STEP 1
Locate the diagnostic connector in the car.
2STEP 2
Connect the chiptuning module plug to the diagnostic connector.
3STEP 3
Press the button on the chiptuning module for about 5 seconds. Wait 30-60 seconds.
4STEP 4
Start driving. We recommend covering the first 200 km in various driving styles.
Scope of delivery:
